Handmade in the atelier — surface texture and tone vary subtly on every piece. Yours will be one of one.
Sculptural Totem · Mono Aurel Atelier
A monumental study in balance and organic form.
Need a different size, colour or finish? Start a Custom Commission
Every piece is shaped over a lightweight sculptural core and finished by hand with multiple layers of mineral plaster, giving a dense, matte, stone-like surface. Mineral pigments, limewash tones and protective finishes are applied by hand according to the selected surface treatment. Tones sit in the ivory, bone and warm sand family and soften beautifully in natural light.
Dust with a dry, soft cloth. Avoid prolonged direct water contact unless your piece was sealed for sheltered outdoor use — if in doubt, write to us; a real person from the atelier answers.
Custom sizes, colours and finishes are available, including RAL, NCS and Pantone tone matching. Tell us the dimensions and tone you need and we will reply with options and a quote. We can also prepare a written spec sheet from your piece’s final measurements for project use.
Every piece is handcrafted to order in our atelier. Production typically takes 5–10 business days unless this page states otherwise; custom sizes and more complex forms may require additional time.
Your piece leaves the atelier as soon as it is finished. Delivery timing and full terms are set out in the section below.
Insured door-to-door delivery is included in the displayed price unless a product page or checkout explicitly states otherwise. Once dispatched, transit typically takes approximately 3–10 business days depending on destination and service; carrier or customs delays can occur. For orders delivered within the United States, applicable customs duties and import charges are covered by Mono Aurel. For deliveries to all other countries, customs duties, import taxes and related destination charges are the buyer's responsibility. Any applicable sales taxes will be displayed at checkout where required. Every shipment is tracked and insured.
Each piece is cushioned and double-boxed like artwork, and you receive tracking as soon as it leaves the atelier.
We share production photos and videos at important stages, and send a detailed final video before dispatch. Your piece is shipped only after you have reviewed and approved it. If you are not satisfied before shipment, we will remake the piece or refund you. Because pieces are made to order, standard change-of-mind returns are not accepted once a piece has been approved and dispatched. Every product is covered by a one-year warranty: in the case of a verified manufacturing defect, product fault or qualifying transit damage, we will provide a refund or a replacement, and in most cases you will not be asked to return the original piece. The warranty does not cover misuse, improper installation, accidental damage or ordinary wear.
See How We Pack and Ship · Read the Shipping Policy · Read the Return and Refund Policy
About this piece
A monumental study in balance and organic form. Harmony Totem stacks a sequence of softly interlocking, teardrop-inspired elements into a vertically flowing composition, individually shaped and finished by hand. Its warm mineral surface creates the appearance of carved stone while retaining the distinctive character of a handcrafted Mono Aurel piece.
Hand-shaped in our atelier and finished with layers of mineral plaster, the sculpture has a softly textured, matte, stone-like surface that gives it the presence of a carved object while remaining suitable for contemporary interiors. It is designed as a statement piece for high-ceiling residences, entryways, living rooms, hospitality spaces and curated commercial interiors, introducing height and sculptural movement without visually overwhelming the surrounding architecture.
Each sculpture is shaped, plastered, sanded and finished individually by hand. Small differences in surface texture, dimensions, tonal variation and sculptural contour are natural characteristics of the process and should not be considered defects. No two pieces are completely identical.
A subtly irregular mineral surface inspired by aged limestone, plaster and hand-finished architectural objects. The finish is intentionally tactile rather than machine-perfect, and gentle tonal variation creates depth in natural or directional light.
Looking for a specific colour? We can prepare the sculpture in a custom tone based on a RAL reference, a paint sample or a photograph of your interior. Contact us before or immediately after placing your order.
Each Harmony Totem is made to order in our atelier. Production takes approximately 5–10 business days. During production we share photographs and video so you can follow the piece as it develops, and before dispatch we send a detailed final video for your approval.
Every order travels insured, door to door, with tracking. Transit typically takes approximately 3–10 business days after dispatch, depending on destination and service level. For orders delivered within the United States, taxes and duties are included. For destinations outside the United States, import duties, customs charges and local taxes may be levied by the destination country and are the responsibility of the recipient.
Harmony Totem can be adapted to a specific architectural setting: custom colours and selected RAL tones, modified height, adjusted proportions, interior designer specifications, hospitality and commercial projects, and pair or multiple-piece installations. For bespoke dimensions, please contact our studio before ordering.
Interior designers, architects and design studios are invited to apply for the Mono Aurel Trade Program for project pricing, specification support and custom production.
One-year limited warranty covering manufacturing-related structural defects under normal indoor use. Natural surface variation, accidental damage, improper installation, impact damage and damage caused by inappropriate environmental exposure are not manufacturing defects.
Harmony Totem is handcrafted and made to order. Because of this, standard returns are generally not accepted once production has begun. If you need to modify or cancel your order, please contact us as soon as possible. Before shipping we provide detailed photographs and video and request your approval of the completed sculpture. Full terms are set out in our Refund Policy.
Notes from the Atelier
Each piece is shaped over a lightweight sculptural core and finished by hand with multiple mineral plaster layers to create its distinctive stone-like surface — applied, dried and carved back until it reads like weathered stone. Mineral pigments, limewash tones and protective finishes are applied by hand according to the selected surface treatment.
Run a hand across the surface and you will find gentle tool marks, grain and subtle shifts in tone. This variation is not a defect — it is the record of the making, and the reason no two pieces are ever identical.
Concept, carving, reinforcement, plaster, hand sanding, pigmentation, inspection — every piece passes through the same slow sequence of hands before it is packed, one piece at a time. See Our Materials and Process.
Sculptural objects work best where they can breathe — a quiet corner, an entryway, the end of a hallway, a console styled sparsely.The lightweight sculptural core keeps large architectural forms manageable to position and to move. Give the piece space and side light; plaster texture comes alive in raking light. Exact dimensions are listed above, and a written spec sheet is available on request.
Dust with a dry, soft cloth. Avoid soaking, harsh cleaners and abrasives. Treated kindly, mineral plaster ages the way good architecture does — slowly, and with character. Read the Care Guidance.
Sizes, tones and finishes can be adapted on selected pieces, with colour matched to RAL, NCS or Pantone references. Send a photo of your space and approximate dimensions and we will prepare three complimentary initial design directions. Start a Custom Commission.
“No two pieces leave the atelier identical. That is the point — not the flaw.”
Mono Aurel Atelier
Pairs well with
From the same family — Sculptures & Totems. Shared material, shared tone, shared quiet.
Free design support
We will prepare three complimentary design directions for your space.
Send us a photo of your space and approximate dimensions. We will prepare three complimentary initial design directions. Detailed development, revisions, technical work and production begin after a concept is selected and the commission is confirmed.
No design fee for the initial directions. No obligation to order.
Enter your email and we’ll send you the next steps for submitting your space.
Free design support
We’ve saved your email. To receive your three complimentary design directions, send a photo of your space with approximate dimensions through the commission form — or simply reply to our email.
Send My Space NowNo design fee for the initial directions. No obligation to order.
